Archive for the ‘rear-set’ Tag
Beautiful. Nothing much else to say. I might have missed some minor detail that’s out of place and someone will point it out. Don’t care. Here’s some specs and more pictures below. There’s more pics and the seller’s writeup if you are interested in learning more or trying to buy the bike. The auction’s at $8,200 with 2 days left and 17 bidders (reserve HAS been met)…
The engine features the work of noted tuner Leo Goff including a balanced lower end, 10.1 pistons, Norris SS cam, and gas flowed head resulting in a very fast and smooth 750 Norton motor.
Steering Damper (Manx type)
Multi Rate Valve Springs (S&W)
Special Camshaft (Norris SS hotter than 2S Combat cam)
Paired Monobloc 1 1/8″ Carbs
Competition Manual Advance Magneto
5 Gal Racing Tank
The tach and speedo were restored by Nisongers.
The magneto was rebuilt by Doug Wood.
The only flaw is some acid stains on the left silencer from a vented battery (since replaced with a sealed unit).
The bike is very strong and smooth and is ready to ride.
This is one of the more modified cafe racers to come up on eBay in a long time. Whether you love or hate the seat, the rest of the bike is built to the hilt. The seller claims the bike “runs super strong”, and from the spec list we have no reason to doubt him. Check out some of the modifications…
Yoshimura Racing 466cc pistons and rings
A.P.E. Racing block and ported heads
Titanium valve spring retainers
Keihin 26mm smooth bore
Triple clamps from 1979 CBX
35mm CB550F forks, clear powder coated, 10 wt oil, new seals
Works Suspension front dual spring kit (#230XH)
Daytona aluminum front fork brace
B900F Koni shocks NOS, #7610, 14″ (+1.5″ of std)
Dual CB550F rotors and calipers, trailing mounted (as opposed to stock forward mounted)
Baker Precision stainless steel brake lines
CBR900RR master cylinder and adjustable level
stretched aluminum tank custom made in England
Pro Flo 35mm clip-ons
CBR900RR footpegs and linkages
So what’s the good? Lots of cool modifications that should make this one of the fastest CB400′s around. And what’s the bad? That seat. Oh yeah. The bike ain’t cheap, either. With about a day and a half left in the auction, there are no bidders and the starting price is $3,900. However, there is no reserve, so if there’s one bid, the bike will sell.
With about 21 hours left in this eBay auction, here’s a chance to own a classic Gus Kuhn Norton that is fully kitted out. It’s definitely not a show bike, and as the seller claims it starts easily and runs great this would probably be a great bike for Sunday morning runs up to Alice’s Restaurant. That being said, I’m sure this bike would attract a lot of attention if it was parked at any classic bike show.
Here’s a list of parts fitted to the bike
Racing 850 Kit
Updated AMAL MK2
Morris mag wheels
AP brake master cylinder
Frame and motor number matching
If you are looking for a decent starting point for a cafe racer project, this might be a good bike to begin your work. It’s a 1973 Honda CB750 that is basically stock and in good shape. The seller provided a good list of his recent upgrades to the mechanicals, so I just cut and pasted the list shown below. There are a few more pictures on eBay of some of the details on the bike, but these give you an overall idea of what this bike has in store for you…
I don’t know if this bike is going to sell or not. It has zero bidders with just over a day left in the auction, but the starting price is at $2,500. Buy-It-Now is set at $3,200. If everything works as stated by the seller, this bike appears to be in line with what a decent CB750 is currently worth. I’d love to see pics of this bike after it gets the cafe treatment…
Had a Honda mechanic replace all the gaskets in the upper half of the engine. Head gasket, valve cover gasket, etc…
Carbs have been cleaned, rebuilt and synched
Valves have been timed
Gas tank has been lined
New OEM petcock fuel valve
Clutch has been rebuilt with OEM Honda parts, OEM clutch cable is new also
Brakes have been serviced and checked out
Original air box replaced with pod filter, carbs were re-jetted at this time with 120′s, i also have the original air box with a new K&N filter
Rear fender has been removed and replaced with a fender eliminator kit and LED rear light. Looks great on the bike. Turn signals were flush mounted and look better this way
New EMGO rear shocks have been added to replace the originals that were pretty useless. I still have them though
Low (super) bars have been added to give it more of the cafe racer look. Note- these are not “clubman” bars because i found them to be uncomfortable
Added a headlight visor to front light
Original chain has been replaced with an o-ring chain
New battery added last summer
Original paint on the gas tank (pretty sure side covers are repro)
I have the original tool kit and original manual from Honda
I also have 3 additional manuals, including the official Honda service manual which is amazing
Tires have plenty of tread on them
Electric ignition and kick start both work great
All lights, guages and electronics function perfectly
Sometimes, an easy litmus test can decide whether something is cool or lame. In the case of this Ducati, just think about riding up to your favorite local hangout. What’s the reaction going to be? Personally, I think this bike would garner looks as being an authentic cafe racer that is no trailer queen. A lot of the Ducatis you might see on Ducati Island at Laguna Seca aren’t going to have this many miles on the clock, nor this much road grime and wear-and-tear. But that’s the whole point, isn’t it?
There isn’t much that hasn’t been done to this bike cafe-wise. It has adjustable clip-ons, shocks, seat, tank, good brakes, and a big-bore kit. What it really needs is (and the seller backs this up) a bit of maintenance come this winter. And maybe a bath and some scrubbing, too.
The price on this bike is still very reasonable at under $2K with less than a day left in the auction (reserve hans’t been met, though). I wish it was on the west coast (it’s in Connecticut), because this may be a chance to get a good deal on a classic bevelhead.
Sometimes, bikes on eBay seem to come in waves. Yesterday, it was the guy dumping Moto Guzzi’s on the auction world. Today is apparently XS650 day. This Yamaha is a very clean example of a cafe racer build that has just about everything done right. Clubman bars, rear-sets, a cafe seat, an exhaust, and classic paint all complete an overall look that is just right. Is the fairing too much for you? You can always take it off the bike if you win the auction.
From the listing, the following items are new on the bike: WHEEL BEARINGS, STEERING HEAD BEARINGS, TIRES, TUBES, SPOKES AND BRAKES, PROGRESSIVE SHOCKS, SWING ARM BEARINGS, REGINA CHAIN, SUNSTAR SPROCKETS, 2.9 GALLON FUEL TANK, CAFE STYLE SEAT, REAR SETS, MINI FAIRING, FRONT AND REAR TURN SIGNALS, HEADLIGHT, CLUBMAN BARS. It also has XS750 dual discs, rebuilt carbs, and a partially rebuilt motor (gaskets and valves).
Currently, the auction is at $2,500 with only 1 bidder and about a day and a half left. However, reserve hasn’t been met yet, so the price will have to go a bit higher before there is a winner. This is a nice example of the Yamaha XS650, so it should go higher and hopefully the seller doesn’t lower reserve.
Ignore the angled, artsy photos for a moment, and what you have here is a good starting point to complete a really nice cafe racer. While it has a clear title (lots of eBay bikes don’t), it is missing a few doo-dads that will make it street legal when you try to register it, including the tail light. That being said, this is a beautiful, well executed bike that has a IMHO a very cool paint job. Add an exhaust, some rear-sets and maybe a tach and you’re good to go. Could even more be done to this bike? Yes, but then you wouldn’t be riding it now, would you…
First off, I would like to apologize for the poor quality of the previous bike and post. After taking a month plus off from blogging about the current crop of cafe racers, I was mostly discombobulated while writing that, given a comment or two that I received both online and in person. :( Be that as it may, it is time to move on to bigger and better things. Below you will see what I hope is my apology in action…
Here we have a really nice Commando 850 that has been entirely cafe’d. I am having trouble finding anything missing from this bike that would need upgrading immediately upon purchase. You could, of course, add higher-performance parts to it. But that doesn’t take away from the fact that it is basically a turnkey bike that the buyer can hop on and ride. The seller has been honest with the few issues that it has (speedo cable, oil weep, and tank dings), and it has a recently rebuilt engine. If there is anything I have missed that should be there (me not being a true Norton expert or anything like that), please let me know…
Currently, there is less than a day left in the auction, and the price is in the mid $4K range with 21 bidders. Perhaps it will break $5K before the auction ends. It isn’t perfect, but the seller is being very upfront with the issues it does have. Good luck if you bid…
I’ve been debating whether or not to post this CB750 cafe racer because of a couple of things. First off, this bike has been lowered front and rear. This would seem to make the bike handle worse than a bike that had been raised from the original ride height. Secondly, it is somewhat of a self-proclaimed showbike with a high Buy-It-Now price. The current bid with 24 hours left is reasonable at around $3K, but it hasn’t met reserve yet.
What’s good about this bike? It’s beautiful! Just take a look!!! And it’s nicely built by what appears to be a good team of builders.
However, like I said earlier, it’s been lowered. Take that for what it’s worth. My 2 cents only.
I’ve got one of these in my garage right now taken apart down to the smallest part, and I can only hope that I am able to finish building it into something like this. Mine is actually an SL350, but same difference pretty much.
This particular cafe racer has some nice upgrades both aesthetically and mechanically. The most obvious things are the tank, seat, and paint. I’m a fan of brightly colored frames with fairly muted paint on the bodywork, and this bike delivers. The only issue is that it shoes off the lack of side covers and the placement of the seat on top of the subframe.
However, the lack of side covers does show off one of the mechanical upgrades, and that’s the Boyer electronic ignition. No points is cool! It also has new Mikuni carbs, and the motor has been gone through with new parts and a valve job. The rearsets are made from RC-51 parts, and the wheels appear to be 18″ front and rear, but no verification on that in the seller’s description.
This is one of the more reasonably priced cafe racers to come up for sale on eBay lately. The Buy-It-Now price is only $2,000, and bidding is currently at $1,000 with only 2 days left. Good luck if you are interested in going after this bike!